numu® Breathing Monitor Sensor Adapter

Ensure accurate breathing & motion monitoring

Specially designed to work with numu air®, this adapter transfers the fine vibrations from the breathable air net directly to your monitor's sensor pad—enabling reliable movement detection even beneath the ultra-light sleep surface.

Seamless compatibility with any monitor

Works with all standard under-mattress breathing and motion monitoring systems. Simply place it between the numu air® net and the sensor pad—no special wiring required.

Reduces false alarms & missed signals

Because numu air® uses a suspended net instead of a solid base, regular sensors will not detect movement properly. This adapter bridges the gap, improving signal accuracy and minimizing false alarms for worry-free monitoring.

Effortless setup & maintenance

Lightweight and durable, it fits snugly with no tools. Easy to remove, clean, and reinstall— maintenance is as simple as wash and go.

$34.90
100 Nights Risk
Free Trial Free Shipping

Monitor-Ready for Enhanced Safety

The sleep surface is designed to keep the mesh taut. It improves the net’s sensitivity to breathing and motion. The springs inside the adapter sense the vibrations in the tight mesh and transfer these signals to the detecting device. Install the device of your choice underneath the sleep surface and connect it to the air net with the adapter, and the safety of your crib is now maximized.

Place Wisely

The monitor pad should be put under the sleep surface. It’s recommended to choose the lower part of the sleep surface, further away from where the baby will be.

Install the Adapter

The adapter goes in between the air net and the monitor pad or similar device. The spring in it will keep it tightly pressed to both surfaces simultaneously.

Vibration Transfer

As the baby breathes and moves, the vibrations on the mesh of the sleep surface are transferred to the monitoring device through the adapter.